Home > Network > Wireless Network Settings > Use Wireless Direct > Configure Your Wireless Direct
Network
Configure Your Wireless Direct Network
Related Models: DCP-T420W/DCP-T425W/DCP-T426W/DCP-T428W
1. Press WiFi Button/LED and Copy Shortcut simultaneously.
Wireless Direct is enabled and the machine starts printing the Wireless Direct Information Sheet.
2. Activate the Wi-Fi function on your wireless device and search for your Brother machine.
3. Select your Brother machine's SSID (Network Name) on your wireless device (DIRECT-xxDCP-
xxxx_BRxxxx).
4. Enter the Network Key (Password) when prompted.
• The SSID and Network Key are printed on the Wireless Direct Information Sheet.
• To disable Wireless Direct:
a. Press WiFi Button/LED and
(Stop) simultaneously.
The Power LED, Warning LED, and Ink LED light up for one second, and then the WiFi
Button/LED starts blinking.
b. Press Copy Shortcut.
Related Information
• Use Wireless Direct
113
To Next Page
Loading...
