Home > Network > Wireless Network Settings > Enable/Disable Wireless LAN
Enable/Disable Wireless LAN
Related Models: DCP-T420W/DCP-T425W/DCP-T426W/DCP-T428W
1. Press WiFi Button/LED and (Stop) simultaneously.
The Power LED, Warning LED, and Ink LED light up for one second, and then the WiFi Button/LED starts
blinking.
2. Press Mono Start to enable Wi-Fi.
• When Wi-Fi is enabled, the Power LED blinks once, and then the Power LED and WiFi Button/LED are
lit.
• When Wi-Fi is disabled, the Power LED blinks twice, and then the Power LED is lit.
Related Information
• Wireless Network Settings
114
To Next Page
Loading...
