Brother DCP-T700W - Page 65

Troubleshooting
57
B
No printout.
(continued)
The document will not print if old, unprinted data remains in the printer driver
spooler. Open the printer icon, and then delete all the data. Your printer icon can
be found in the following way:
(Windows
®
XP and Windows Server
®
2003 (DCP-T500W and DCP-T700W))
Click Start/Printers and Faxes.
(Windows Vista
®
and Windows Server
®
2008 (DCP-T500W and DCP-T700W))
Click /Control Panel/Hardware and Sound/Printers.
(Windows
®
7 and Windows Server
®
2008 R2 (DCP-T500W and DCP-T700W))
Click /Devices and Printers/Printers and Faxes.
(Windows
®
8 and Windows Server
®
2012 (DCP-T500W and DCP-T700W))
Move your mouse to the lower right corner of your desktop. When the menu bar
appears, click Settings/Control Panel/Hardware and Sound (Hardware)
group/View devices and printers/Printers.
(Windows Server
®
2012 R2)
Click Control Panel on the Start screen. In the Hardware group, click
View devices and printers/Printers.
(OS X v10.7.5, 10.8.x)
Click System Preferences/Print & Scan.
(OS X v10.9.x)
Click the System Preferences/Printers & Scanners.
The headers or footers appear
when the document displays on the
screen but they do not show up
when it is printed.
There is an unprintable area on the top and bottom of the page. Adjust the top and
bottom margins in your document to allow for this.
(See Unprintable area on page 15.)
Cannot perform “Page Layout”
printing.
Check that the paper size setting in the application and in the printer driver are the
same.
Print speed is too slow. Try changing the printer driver setting. The highest resolution needs longer data
processing, sending and printing time. Try the other quality settings in the printer
driver as follows:
(Windows
®
)
Click Colour Settings on the Advanced tab, and make sure you uncheck
Colour Enhancement.
(Macintosh)
Choose Color Settings, click Advanced Color Settings, and make sure you
uncheck Color Enhancement.
Turn the Borderless feature off. Borderless printing is slower than normal printing.
(See Software and Network User’s Guide.)
Colour Enhancement is not
working correctly.
If the image data is not full colour in your application (such as 256 colour), Colour
Enhancement will not work. Use at least 24 bit colour data with the Colour
Enhancement feature.
Machine does not print from
Adobe
®
Illustrator
®
.
Try to reduce the print resolution.
(See Software and Network User’s Guide.)
Printing Difficulties (continued)
Difficulty Suggestions