App. 4-20 Confidential
WSW16
(Function setting 1)
Selector
No.
Function
Setting and Specifications
1 Not used.
2
ITU-T (CCITT) superfine
recommendation
0: OFF 1: ON
3
|
6
Not used.
7 Max. document length limitation 0: 400 cm 1: 90 cm
8
Stop key pressed during reception
(Not used.)
0: Not functional 1: Functional
NOTE: Selector 7 is applicable to models with ADF unit.
Selector 2: ITU-T (CCITT) superfine recommendation
If this selector is set to "1," the machine communicates in ITU-T (CCITT) recommended superfine
mode (15.4 lines/mm). If it is set to "0," it communicates in native superfine mode.
Selector 7: Max. document length limitation
This selector is used to select the maximum length of a document to be sent.
Selector 8: Stop key pressed during reception (Not used.)
If this selector is set to "1," pressing the Stop key can stop the current receiving operation. The
received data will be lost.
To Next Page
