3-32 Confidential
Purge types, ink usage, purge counts, and purge codes
Purge Types Description Ink Usage Purge Counts
Purge Codes
(In the maintenance
mode, Function
code 76)
*
Normal purge
This purge operation removes
dried ink sticking to the head
nozzles.
Black: 0.21 mL
Per color: 0.13 mL
Black: 11
Total of
colors: 21
1
Periodical reset
purge
This purge operation removes
any bubbles that have
accumulated in the ink supply
tubes.
Black: 0.44 mL
Per color: 0.32 mL
Black: 24
Total of
colors: 54
2
Power purge
More powerful than a
periodical reset purge, this
purge operation is for
removing stubborn clogging
from the head nozzles and ink
supply tubes.
Black: 0.59 mL
Per color: 0.38 mL
Black: 32
Total of
colors: 64
3
Initial purge
When the user loads ink
cartridges for the first time,
this purge operation
automatically runs to refill the
ink supply tubes and print head
with fresh ink.
Black: 2.92 mL
Per color: 2.59 mL
Black: 163
Total of
colors: 432
4
User reset purge
This purge operation should be
performed if the print quality
problem persists after a user
has performed the purge
operation repeatedly by
pressing the Ink (Ink
Management) key.
Black: 0.50 mL
Per color: 0.32 mL
Black: 28
Total of
colors: 54
5
Engine setup
purge
This purge operation refills the
ink supply tubes with ink when
there is no ink in those tubes.
Black: 2.92 mL
Per color: 2.59 mL
Black: 163
Total of
colors: 432
6
* To enter a numerical code on models having no numerical keypad, press the / key several times to
display the numerical code to be entered on the LCD and then press the OK key. After that, press the
Black Start (Mono Start) key.
To Next Page
Loading...
