Brother GT-3 Series - Unpacking Your Printer; Required Condition; Environment

1. Read This First
1-2. Unpacking Your Printer
<Note>
Your printer must be unpacked by a Brother representative or a Brother authorized shipping company.
After unpacking, check that the following parts are included.
Contact Brother Customer Service Hot Line if any of these is missing.
 GT-3 Printer
 AC cord
 Wash Liquid L: 1 pce., Clean Stick: 6 pcs, Clean Applicator: 6 pcs.
 Print Heads: 8 for GT-381, 6 for GT-361, 4 for GT-341
 One Waste Ink Tank
 One Encoder Cleaner
 One Maintenance Cartridge for GT-381, GT-361
 One Tube Cleaning Bottle for GT-381, GT-361
 Flushing Plate (including Flushing Plate Felt and Flushing Plate Sponge)
 Basic Operation Manual
 Grease
 USB 2.0 hub
<Note>
Filter Cartridges (8 for GT-381, 6 for GT-361, 4 for GT-341) are installed in both Ink Cartridge Slots. Keep them
since they should be used for maintenance & transport operations.
1-3. Required Condition
Please use your printer under the conditions described in this section.
1-3-1. Environment
Temperature
Humidity
Keeping your printer
32 °F to 104 °F
(0 °C to 40 °C)
20 % to 85 %
(no condensation)
Operating your printer
50 °F to 95 °F
(10 °C to 35 °C)
45 % to 85 %
(no condensation)
For the best print result
64 °F to 86 °F
(18 °C to 30 °C)
If your room is dry, we recommend using a humidifier to avoid Print Heads from clogging with dried ink.
GT-3 Series
5