Brother GT-3 Series - Assignment of GT-3 S IP Address

3. Getting Started
3-3-4-2. Assignment of GT-3’s IP Address
Assign the GT-3’s IP address after you finish assigning your computer’s IP address.
(1) Turn ON the GT-3 with your PC and GT-3 are connected with USB 2.0 cable. Execute the GT-3
Maintenance and select [ IP address Assignment ]. Click the [ Next ] Button.
(2) Assign the defined number of IP address, Subnet mask and Default gateway to GT-3,and click [ OK ]
button. (The numbers below are examples.)
GT-3 Series
28