Brother GT-3 Series - Page 2

When you dispose of the machine
Required Tools
Phillips screwdriver: M3 to M5
Disassembling
1. Remove the Cover DR (right side).
2. Remove the Lithium Battery (1) by pulling out the holder in the direction of the arrow.
3. Pickup the Lithium Battery (1) to the direction of the arrow.
This product contains a CR Coin Lithium Battery which contains
Perchlorate Material – special handling may apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
Note based on California law (USA) on the use and handling of Perchlorate
(1)
(1)
(1)
(1)
GT-3 Series