2. Identifying Your Printer’s Parts
Menu Content
Printer Setting
Flushing Interval: Adjusts the number of lines (interval) to flush ink in printing.
See "7-2-10. Adjusting the Flushing Interval" in the Instruction Manual.
Flushing Volume: Adjusts the ink volume in flushing. See "7-2-11.
Adjusting the Flushing Volume" in the Instruction Manual.
Daily Cleaning W Setting: Adjusts the amount of White Ink that is flushed in Daily
Cleaning White.
See "7-2-12. Adjusting the amount of White Ink in Daily
Cleaning White" in the Instruction Manual.
Auto Job Delete: Deletes the print data automatically after the print number which is set with
Printer Driver is finished. Default is OFF.
GT-341 mode (No White): Sets the printer to stop all the operation of White Heads.
See "5-1-5. Required Maintenance for Long Term Storage".
Total Print Shows the number of prints.
Platen Reset Restores the Platen.
Language Sets the language shown on the display. See "3-4-4. Language".
Version Shows versions of the firmware.
GT-3 Series
17
To Next Page
Loading...
