Brother HL-2030 - Page 111

HL-2030/2040/2070N SERVICE MANUAL
Confidential
4-19
(10) Remove the HR gear.
(11) Remove the two HR bush.
Fig. 4-30
(12) Remove the thermistor ASSY harness from the four hooks.
(13) Remove the cup B M3x12 taptite screw, and then remove the thermistor ASSY.
Fig. 4-31
HR gear
HR bush
HR bush
HR gear
Thermistor ASSY harness
Heat roller
Return the hook to the
original position.
Return the hook to the
original position.
Hooks
Thermistor ASSY
Taptite, cup B M3x12
Fuser frame
Hooks
Hooks