CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
Confidential
4-18
NOTE:
When re-assembling the heat roller, assemble the HR bush onto the fuser frame referring to
the figure below.
Fig. 4-28
NOTE:
When re-assembling the halogen heater, put the halogen heater onto the fuser frame so that
the terminal of the heater harness is at the top, and secure the screws in the order shown in
the figure below.
Fig. 4-29
HR bush
Heat roller
Fuser frame
Heater harness
Halogen heater
Fuser frame
2 1
To Next Page
Loading...
