CHAPTER 2 INSTALLATION AND BASIC OPERATION
Confidential
2-8
For Parallel Interface Cable users (HL-2040/2070N users)
(1) Click Install Printer Driver on the menu screen.
(2) Select the Parallel interface.
(3) Turn off the printer power switch.
(4) Connect the parallel interface cable to your PC, and then connect it to the printer. Read
the license agreement carefully. Then, follow the on-screen instructions.
(5) Click the Finish button. Turn on the printer power switch. The setup is now complete.
For Network Interface Cable users (for HL-2070N only)
• For connecting the printer to a network, it is recommended to contact the system
administrator prior to installation.
• For the administrator: Configure the printer referring to the following instructions.
1. For the administrator
Install the BRAdmin Professional Configuration Utility (Windows
®
Users Only)
The BRAdmin Professional software is designed to manage your Brother network connected
devices. For more information on BRAdmin Professional, go to http://solutions.brother.com
(1) Insert the CD-ROM into your CD-ROM drive. The opening screen will appear
automatically. Follow the on-screen instructions.
(2) Click the Install Other Drivers or Utilities icon on the menu screen.
(3) Click BRAdmin Professional. Follow the instructions on the screen.
NOTE:
• The default password for the print server is “access”. You can use the BRAdmin
Professional software or a web browser to change this password.
• Please use the BRAdmin Professional utility version that was supplied on the CD-ROM
with your Brother product. You can also download the latest Brother BRAdmin
Professional utility version from http://solutions.brother.com
. This utility is only available for
Windows
®
users.
• If you are using Personal Firewall software, disable it. Once you are sure that you can
print, re-start your Personal Firewall software.
Setting your IP Address, Subnet Mask and Gateway using BRAdmin Professional
(Windows
®
Users Only)
NOTE:
If you have a DHC/BOOTP/RARP server in your network, you don’t have to do the following
operation. Because the printer server will automatically obtain its IP address.
(1) Start BRAdmin Professional, and select TCP/IP.
(2) Select Search Active Devices from the Devices menu. BRAdmin will search for new
devices automatically.
(3) Double-click the new device.
(4) Enter the IP Address, Subnet Mask and Gateway, and then click the OK button.
(5) The address information will be saved to the printer.
To Next Page
Loading...
