CHAPTER 2 INSTALLATION AND BASIC OPERATION
Confidential
2-10
4. For Brother Peer-to-Peer network printer users (LPR-recommended Peer-to-
Peer printing method)
Configuring the LPR port
(1) Select Search the network for devices and choose from a list of discovered
devices (Recommended). Or enter your printer’s IP address or its node name.
Click the Next button.
Fig. 2-8
NOTE: Contact your Administrator about the Printer’s IP Address.
(2) Select your printer and LPR (Recommended), and then click the Next button.
Fig. 2-9
(3) Click the Finish button.
For WindowsNT
®
4.0 and Windows
®
2000/XP users: The setup is now complete.
For Windows
®
95/98/ME users: After your PC has restarted, the setup will be
complete.
5. For Brother Peer-to-Peer network printer users (NetBIOS)
Configuring the NetBIOS port
(1) Select Search the network for devices and choose from a list of discovered
devices (Recommended), and then click the Next button.
(2) Select your printer and NetBIOS, and then select “NetBIOS”. Click the Next button.
(3) Click the Finish button.
For WindowsNT
®
4.0 and Windows
®
2000/XP users: The setup is now complete.
For Windows
®
95/98/ME users: After your PC has restarted, the setup will be
complete.
To Next Page
Loading...
