Brother MFC-2712DN User Manual

2-27
Confidential
Journal Full -
The number of the registered
communication management
reports reached 200.
--- 4.14.5
Machine Error -
Detected that the modem PCB
is not connected.
D200 2-70
Machine Error
F9
-
The spec code was not entered
correctly.
F900 2-72
Manual Feed Load Paper.
There is no paper set in the
manual feed slot on the manual
feed slot printing.
8C00 2-61
Media
Mismatch
Reload correct
paper in MP Tray,
then press Go.
When printing from the MP tray,
paper type setting in the
machine does not match the
setting in the driver.
9201 2-62
Reload correct
paper in Tray 1, then
press Go.
When printing from the paper
tray, paper type setting in the
machine does not match the
setting in the driver.
9202 2-62
No Cartridge Put the Toner
Cartridge back in.
Toner cartridge could not
communicate with the cartridge
sensor.
2500 2-51
No Drum Unit Open the Front
Cover, then install
the Drum Unit.
Detected that the drum unit was
not set by detecting the
electrodes current.
6200 2-55
No Paper Reload paper in
Tray.
Detected that there was no
paper set in all trays when
TrayAuto was selected for
printing.
9309 2-64
Detected that there was no
paper set in all trays when
TrayAuto was selected for
printing.
(At Fax / List printing)
--- 4.2.1
No Paper MP Reload paper in MP
Tray.
When paper was fed from the
MP tray, the MP paper empty
sensor detected that no paper
was in the MP tray.
9301 2-63
When paper was fed from the
MP tray, the MP paper empty
sensor detected that no paper
was in the MP tray.
(At Fax / List printing)
--- 4.2.2
Error message
Description
Error
codes
Refer
to:
Initial display Scroll

Brother MFC-2712DN Specifications

General

Brand	Brother
Model	MFC-2712DN
Category	All in One Printer
Language	English