Brother MFC-6800 - Accessing the Scanner; Scanning an Image into Your Macintosh G3, G4 or Imac

18 - 8 USING THE BROTHER MFC WITH A NEW POWER MACINTOSH
®
G3, G4 OR IMAC™ /IBOOK
Accessing the Scanner
Run your PaperPort
®
software. You will see the PaperPort
®
icon in the upper
right corner of your screen. The first time you use the Brother TWAIN driver,
set it as the default by choosing Select Source and clicking the PaperPort
®
icon.
Afterward, for each original you scan, choose Acquire Image by clicking the
PaperPort
®
icon. The Scanner setup dialog box will appear.
Scanning an Image into Your Macintosh G3, G4 or
iMac
1 Place the original face up in the ADF, or face down on the scanner glass.
2 Adjust the following settings, if needed, in the scanner setup dialog box:
Resolution
Color Type
Brightness
Contrast
Scanning Area
3 Click Start.
When scanning is finished, the image will appear in your graphics application.