Brother MFC-6800 - Control Panel Overview

INTRODUCTION 1 - 3
MFC-6800 Control Panel Overview
1Liquid Crystal Display (LCD)
The LCD displays messages to help you
set up and operate your MFC.
2Toner Empty Indicator
Blinks when the toner cartridge is low
and stays lit when toner is empty.
3Fax Keys:
Fax Resolution
Sets the resolution when you send a fax.
Receive Mode
Use to select how the MFC will handle
incoming calls.
Redial/Pause
Redials the last number called. Also
inserts a pause in auto dial numbers.
Dial Pad
Use to dial phone and fax numbers and
as a keyboard for entering information
into the MFC.
(For Canada Only): The # key lets you
switch the dialing type during a
telephone call from
PULSE to TONE.
Broadcast
Use this key when you want to
broadcast the same fax to many
different locations (maximum of 150
locations at once).
Search/Speed Dial
Lets you look up numbers stored in the
dialing memory. Also lets you dial
stored phone numbers by pressing # and
a two-digit number.
Fax Start
Starts an operation, such as sending a
fax.
4Reports
Accesses the Reports menu so you can
select a report to print: Help List,
Auto Dial, Fax Activity,
Transmission Verification
and User Settings.
5Stop/Exit
Stops a fax, cancels an operation, or
exits from Menu mode.
2
1 9 8
3
4
5 76