Brother MFC-6800 - Dialing Options; Search; Speed Dialing

7 - 3 AUTO DIAL NUMBERS AND DIALING OPTIONS
Dialing Options
You can use your MFC to make telephone calls by dialing manually or by using
Search or Speed Dial memory. When you dial an auto dial number, the LCD
shows the name you’ve stored, or if you haven’t stored a name, the fax number
you’ve stored.
Search
You can search for names you have stored in Speed Dial memory. (See Storing
Speed Dial Numbers
, page 7-1.)
1 Place the original face down in the ADF, or face down on the scanner glass.
2 Press Search/Speed Dial.
3 To search for numbers alphabetically by name, enter the first letter of the name, and
then press
or .
—OR—
To search for numbers numerically by Speed-Dial number, press .
4 When the LCD shows the name you want to call, press Fax Start.
Speed Dialing
1 Place the original face up in the ADF, or face down on the scanner glass.
2 Press Search/Speed Dial, press #, then press the two-digit Speed Dial
location. (See
Storing Speed Dial Numbers, page 7-1.)
3 Press Fax Start.
or