Brother MFC-6800 - Copy Mode (Type of Original); Copy Contrast; Paper Type

MAKING COPIES 11 - 9
Copy Mode (Type of Original)
You can select the Copy resolution for your type of original. The default setting is
AUTO , which is used for originals that contain both text and photographs. TEXT
is used for originals containing only text.
PHOTO is used for copying photographs.
1 Press Menu/Set, 3, 1.
2 Press to choose the type of original
(AUTO, TEXT or PHOTO), and then press Menu/Set.
3 Press Stop/Exit.
Copy Contrast
You can adjust copy contrast to make copies darker or lighter.
1 Press Menu/Set, 3, 2.
2 Press to make a copy lighter
—OR—Press
to make a copy
darker, and then press Menu/Set.
3 Press Stop/Exit.
Paper Type
You can use the following types of paper for copying. For the best print quality,
select the type of media that you use most often.
THIN (17lb - 18.4lb) - For thin paper
PLAIN (18.7lb - 25.3lb) - For ordinary plain paper
THICK (25.6lb - 32lb) - For heavy weight paper or rough paper
THICKER (32.3lb - 42.1lb) - For heavier weight paper, rough paper or bond
paper.
1 Press Menu/Set, 3, 3.
2 Press to select your type of paper, and then press Menu/Set.
3 Press Stop/Exit.
1.COPY MODE
or
2.CONTRAST
or