Brother MFC-6800 - Making Copies; Using the MFC as a Copier

MAKING COPIES 11 - 1
11
11 Making Copies
Using the MFC as a Copier
You can use the MFC as a
copy machine, making up
to 99 copies at a time.
The scannable area of your
MFC begins at approximately one-
sixth inch (4mm) from the edge of the
paper.
Making a Single Copy (Using the ADF)
1 Place the original face up in the ADF.
2 Press Copy.
Do NOT pull on the paper while copying is in progress.
Making Multiple Copies (Using the ADF)
1 Place the original face up in the ADF.
2 Use the dial pad to enter the number of copies you want (up to 99).
3 Press Copy.
Imcoming faxes cannot be received on paper or into memory while the MFC is
copying.
Note
To stop the copy process and release the original, press Stop/Exit.
To sort the copies, use Options key. (See Using the Options Key, page 11-5.)
Copy Keys
Not
Scannable
area
1/6" (4mm)
1/6" (4mm)