Brother MFC-7220 - Page 102

Confidential
5-33
(2) Remove the two bind B M4x12 taptite screws to remove the scanning drive LF FG harness
and NCU unit.
(3) Turn the NCU unit upside down.
(4) Remove the two cup S M3x6 taptite screws from the NCU unit to remove the NCU
PCB ASSY.
(5) Disconnect the NCU harness ASSY.
Taptite, bin
d
B M4x12
N
CU uni
t
Inne
r
chute cover ASSY
Taptite, cup S M3x6
N
CU PCB ASSY
N
CU shield cove
r
N
CU harness ASSY
LF FG harness