Brother MFC-7220 - Page 118

Confidential
5-49
(5) Remove the LV insulation sheet.
(6) Remove the pan (S/P washer) M3.5x6 screw, and then remove the ground wire.
(7) Remove the bind B M4x12, taptite screw and then remove the AC holder.
(8) Remove the two bind B M4x12, taptite screws and then remove the LV shield plate.
NOTE: Re-assemble the ground wire so that the section attached to the terminal is
downwards.
LV shield plate
LV insulation shee
t
Main frame R
LV shield plate
Ground wire
Screws, pan (S/P washer)
M3.5x6
Taptite, bind B M4x12
AC holde
r
Taptite, bind B M4x12
Taptite, bind B M4x12