Confidential
FAX-2820/2825/2910/2920
MFC-7220/7225N
APPENDIX 3. CUSTOMIZING CODES
ACCORDING TO SHIPPING
DESTINATION
This appendix provides instructions on how to set up the customizing codes for the various
preferences exclusively designed for each destination (e.g. language). Those codes are stored
in the memory (EEPROM) mounted on the main PCB. If the main PCB is replaced, therefore,
you need to set the proper customizing code with the machine in the maintenance mode.
NOTE: Customizing codes customize firmware for individual models, enabling the common
firmware to be used for various models. They come with the firmware data provided
by Brother Industries.
To Next Page
Loading...
