App. 4-53 Confidential
WSW49
(End-of-copying beep and print in black)
Selector
No.
Function
Setting and Specifications
1
2
RAM DISK
SIZE: None
3 End-of-copying beep 0: Yes 1: No
4
5
Command flag detection
time
No. 4 5
0 0 : 150 ms
0 1 : 350 ms
1 0 : 550 ms
1 1 : 750 ms
6
7
Not used.
8 Print in black (Not used.) 0: No (Normal color print) 1: Yes
Selectors 4 and 5: Command flag detection time
After receiving a command flag, the machine will wait for the command that should follow for the
time length specified by these selectors.
Selector 8: Print in black (Not used.)
Setting this selector to "1" allows printing in black only so that the machine can continue printing
even if any color ink cartridge sensor detects empty. That is, the machine can be used as a
monochrome machine.
To Next Page
Loading...
