To Next PageTo Next Page
How to fix Brother Software when I cannot communicate with my Brother machine using SSL?
To communicate with your Brother machine using SSL, ensure you obtain a valid certificate and install it on both your machine and computer. Also, verify that the port setting of your machine is correct. You can confirm your machine’s port setting on the Web Based Management screen by clicking Network, Protocol, and then HTTP Server Settings.
How to fix Brother Software 'Authenticate Err Sending Error'?
If you receive an 'Authenticate Err Sending Error' with your Brother Software, it could be due to a wrong username or password. Confirm your username and password for the CIFS server. If the username is part of the domain, ensure you include the domain name with the username, for example, user@domain or domain\user.
What to do if Brother Software shows 'Server Time out'?
If you're experiencing a 'Server Time out' error with your Brother Software, the cause might be a wrong host address. If you've used your CIFS server's IP address as the Host Address, double-check the IP address. If you've specified the DNS style, confirm the Host Address, and contact your network administrator for your DNS style address. If you've used your computer name as the Host Address, verify the computer name and contact your network administrator for the WINS server settings.
Why does my Brother Software show 'Authenticate Err Wrong Date&Time'?
If you're encountering an 'Authenticate Err Wrong Date&Time' error with your Brother Software, it's likely due to incorrect date and time settings on your machine. To resolve this, use the machine's control panel to correctly set the date, time, and time zone. Ensure these settings match those of the server providing authentication.
Why am I getting error messages using the Brother Software Scan to FTP feature?
If you receive error messages using the Brother Software Scan to FTP feature, it could be due to several reasons. First, verify the FTP server's IP address or the DNS server address. If the issue persists, double-check your username and password for the FTP server. Another potential cause is an incorrect destination folder setting on the FTP server. Lastly, it may be due to a lack of access rights. If this is the case, contact your network administrator.
How to fix 'Drum Error' on my Brother All in One Printer?
If your Brother All in One Printer displays 'Drum Error', it means the corona wire on the drum unit needs cleaning, or the toner cartridge is placed in the machine without the drum unit. Clean the corona wire on the drum unit. If the toner cartridge is missing, put the toner cartridge into the drum unit, and then re-install the drum unit and toner cartridge assembly in the machine.
What to do if my Brother Printer cannot complete the Wi-Fi Direct network setup configuration?
First, double-check the SSID and password. If your Brother machine is a G/O (Group Owner) in manual configuration, the SSID and password are on the machine's control panel. If your mobile device is a G/O, the SSID and password appear on the mobile device's screen. If the issue persists, ensure your Brother machine is within 3.3 feet (1 meter) of the mobile device without obstructions like walls or furniture. Also, move wireless computers, Bluetooth devices, microwaves, and cordless phones away from the Brother machine and mobile device.
How to activate wireless setting on Brother MFC-8510DW All in One Printer?
To activate the wireless setting on your Brother All in One Printer, turn the wireless setting to ON. If a LAN cable is connected, disconnect it and then turn the wireless setting on. On your printer, press Menu, then 7 (Network), then 2 (WLAN), then 2 (Setup Wizard). When 'WLAN Enable ?' is displayed, choose 'On' and press OK. This will start the wireless setup wizard.
What to do if wireless security information is incorrect on Brother All in One Printer?
If the wireless security information (Authentication method/Encryption method/Network Key) is incorrect on your Brother All in One Printer, reconfirm the wireless security information (Authentication method/Encryption method/Network Key). If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only.
How to fix incorrect SSID or Network Key on Brother All in One Printer?
If the security information (SSID/Network Key) is incorrect on your Brother All in One Printer, reconfirm the SSID and security information (Network Key). If your router uses WEP encryption, make sure you enter the key used as the first WEP key, since your Brother machine only supports the use of the first WEP key.
General| Print Technology | Laser |
|---|---|
| Functionality | Print, Copy, Scan, Fax |
| Print Resolution | 1200 x 1200 dpi |
| Connectivity | USB, Ethernet, Wi-Fi |
| Automatic Duplex Printing | Yes |
| Paper Capacity | 250 sheets |
| Automatic Document Feeder (ADF) | Yes |
| ADF Capacity | 50 sheets |
| Scanning Resolution | 1200 x 1200 dpi |
| Fax Speed | 33.6 Kbps |
| Operating Systems | Windows, macOS, Linux |
| Mobile Printing | Brother iPrint&Scan, Google Cloud Print, AirPrint |
| Maximum Paper Size | Legal |
| Scan Type | Flatbed |
