Brother MFC-8510DW Network User's Guide

132
Security features
8
g After configuring, click Submit.
(Wired)
After configuring, connect your machine to the IEEE 802.1x supported network. After a few minutes, print
the Network Configuration Report to check the <Wired IEEE 802.1x> Status. (See Printing the Network
Configuration Report uu page 63.)
 Success
The wired IEEE 802.1x function is enabled and the authentication was successful.
 Failed
The wired IEEE 802.1x function is enabled, however, the authentication failed.
 Off
The wired IEEE 802.1x function is not available.
(Wireless)
Shortly after configuring, WLAN report will be printed automatically. Check your wireless configuration
on the report. See Printing the WLAN report (For MFC-8710DW, MFC-8910DW and MFC-8950DW(T))
uu page 64.
Using Certificates for device security 8
Your Brother machine supports the use of multiple security certificates allowing secure management,
authentication and communication with the machine. The following security certificate features can be used
with the machine.
 SSL/TLS communication
 IEEE 802.1x authentication
 SSL communication for SMTP/POP3
The Brother machine supports the following certificates.
 Pre-installed certificate
Your machine has a pre-installed certificate.
Using this certificate, you can easily use the SSL/TLS communication without creating or installing a
certificate.
 Self-signed certificate
This print server issues its own certificate. Using this certificate, you can easily use the SSL/TLS
communication without having a certificate from a CA. (See Creating and installing a certificate
uu page 135.)

Brother MFC-8510DW Specifications

General

Brand	Brother
Model	MFC-8510DW
Category	All in One Printer
Language	English