Brother MFC-8510DW - Turning Setting Lock On;Off; Restricting Dialling; Dial Pad Restriction

Security features
11
2
Turning Setting Lock on/off 2
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Setting Lock on
a Press Menu, 1, 8, 2.
b Press a or b to choose On.
Press OK.
c Enter your four-digit password.
Press OK.
d Press Stop/Exit.
Turning Setting Lock off
a Press Menu, 1, 8, 2.
b Enter your four-digit password.
Press OK twice.
c Press Stop/Exit.
Restricting dialling 2
This feature is to prevent users from sending
a fax or calling a wrong number by mistake.
You can set the machine to restrict dialling
when you use the dial pad, One Touch,
Speed Dial or LDAP search
1
.
If you choose Off, the machine does not
restrict the dialling method.
If you choose Enter # twice, the machine
will prompt you to re-enter the number, and
then if you re-enter the same number
correctly, the machine will start dialling. If you
re-enter the wrong number, the LCD will
show an error message.
If you choose On, the machine will restrict all
fax sending and outbound calls for that
dialling method.
1
LDAP is available as a download from the Brother
Solutions Center at: http://solutions.brother.com/
.
Dial pad restriction 2
a Press Menu, 2, 6, 1.
b Press a or b to choose On, Off or
Enter # twice.
Press OK.
c Press Stop/Exit.