Brother MFC-8510DW - Adjusting Brightness and Contrast

Making copies
49
7
Adjusting Brightness and
Contrast 7
Brightness 7
Adjust the copy brightness to make copies
darker or lighter.
 To temporarily change the copy
brightness setting, follow the steps below:
a Make sure you are in COPY mode
.
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Options.
Press a or b to choose Brightness.
Press OK.
e Press c to make a lighter copy or
press d to make a darker copy.
Press OK.
f Press Start.
 To change the default setting, follow the
steps below:
a Press Menu, 3, 2.
b Press c to make a lighter copy or
press d to make a darker copy.
Press OK.
c Press Stop/Exit.
Contrast 7
Adjust the contrast to help an image look
sharper and more vivid.
 To temporarily change the copy contrast
setting, follow the steps below:
a Make sure you are in COPY mode
.
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Options.
Press a or b to choose Contrast.
Press OK.
e Press d to decrease the contrast or
press c to increase the contrast.
Press OK.
f Press Start.
 To change the default setting, follow the
steps below:
a Press Menu, 3, 3.
b Press d to decrease the contrast or
press c to increase the contrast.
Press OK.
c Press Stop/Exit.