Brother MFC-8510DW - Setting the Fax Receive Stamp; Setting the Print Density

Receiving a fax
31
4
Setting the Fax Receive
Stamp 4
You can set the machine to print the received
date and time in the top centre of each
received fax page.
a Make sure you are in FAX mode .
b Press Menu, 2, 1, 8.
c Press a or b to choose On or Off.
Press OK.
d Press Stop/Exit.
Note
• The received time and date will not appear
when using Internet Fax.
• Make sure you have set the current date
and time in the machine. (uu Quick Setup
Guide)
Setting the Print Density 4
You can adjust the Print Density setting to
make your printed pages darker or lighter.
a Make sure you are in FAX mode .
b Press Menu, 2, 1, 6.
c Press c to make the print darker.
Or, press d to make the print lighter.
Press OK.
d Press Stop/Exit.