Brother MFC-8510DW - Reports; How to Print a Report

Chapter 6
44
Reports 6
The following reports are available:
1 XMIT Verify
Displays the Transmission Verification
Report for your last outgoing 200 faxes
and prints the last report.
2 Tel Index List
Prints a list of names and numbers stored
in the One Touch and Speed Dial memory
in numerical or alphabetical order.
3 Fax Journal
Prints a list of information about your last
200 incoming and outgoing faxes.
(TX: transmit.) (RX: receive.)
4 User Settings
Prints a list of your current settings.
5 Network Config
Lists your network settings.
6 Drum Dot Print
Prints the drum dot check sheet for
troubleshooting a dotted print problem.
7 WLAN Report (MFC-8910DW)
Prints the result of wireless LAN
connectivity diagnosis.
How to print a report 6
a Press Menu, 6.
b Press a or b to choose the report you
want to print.
Press OK.
c Do one of the following:
 If you chose XMIT Verify, press
a or b to choose View on LCD or
Print Report.
Press OK.
 If you chose Tel Index List,
press a or b to choose Numeric or
Alphabetic.
Press OK.
 For other reports, go to step d.
d Press Start.
e Press Stop/Exit.