Brother MFC-9140CDN - Paper Settings and Types

Chapter 2
28
Paper settings 2
Paper Size 2
You can use the following sizes of paper for
printing faxes: A4, Letter, Legal or Folio.
When you change the size of paper in the
tray, you must also change the setting for
paper size at the same time so your machine
can fit the document or an incoming fax on
the page.
You can use the following sizes of paper.
For printing copies:
A4, Letter, Legal, Executive, A5, A5 L (Long
Edge), A6 or Folio (215.9 mm × 330.2 mm)
For printing faxes:
A4, Letter, Legal or Folio (215.9 mm × 330.2
mm)
a Press .
b (MFC-9340CDW)
Press Tray Setting.
c Press Paper Size.
d Swipe up or down, or press a or b to
display A4, Letter, Legal, EXE, A5,
A5 L, A6, Folio, 16K(195x270mm),
16K(184x260mm) or
16K(197x273mm), and press the
option you want.
e Press .
NOTE
• When an appropriate size is not in the
tray, received faxes will be stored in the
machine’s memory and Size mismatch
will appear on the Touchscreen (for more
information, see Error and maintenance
messages on page 114).
• If the tray is out of paper and received
faxes are in the machine’s memory,
No Paper will appear on the
Touchscreen. Insert paper in the empty
tray.
Paper Type 2
To get the best print quality set the machine
for the type of paper you are using.
a Press .
b (MFC-9340CDW)
Press Tray Setting.
c Press Paper Type.
d Swipe up or down, or press a or b to
display Thin, Plain Paper, Thick,
Thicker, Recycled Paper, and
press the option you want.
e Press .