Brother MFC-9140CDN - Receiving a fax; Receive Modes and Settings

39
5
5
Receive modes 5
By default, your machine will automatically receive any faxes that are sent to it. There are four
receive modes of this machine as below. (For more detailed information about the receive modes,
see Using receive modes on page 40.)
To set the receive mode follow the instructions below.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display Fax.
d Press Fax.
e Swipe up or down, or press a or b to display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to display Receive Mode.
h Press Receive Mode.
i Press Fax Auto, Fax/Tel, External TAD or Manual.
j Press .
To see the current receive mode, press on the Touchscreen.
Receiving a fax 5
Touchscreen Display Factory Default Ring Delay
Fax Auto Ring Delay: 2 times
Fax detection: On
Fax/Tel Ring Delay: 2 times
F/T Ring Time: 20 seconds
Manual
External TAD