Brother MFC-9325CW - Auto Registration; Frequency (Colour Correction); Manual Registration

Troubleshooting and routine maintenance
169
C
Auto Registration C
Registration C
If solid areas of colour or images have cyan,
magenta or yellow fringes, you can use the
auto-registration feature to correct the
problem.
a Press Menu, 4, 6, 1.
b To start, press 1.
To exit, press 2.
c Press Stop/Exit.
Manual Registration C
If colour still appears incorrectly after auto-
registration, you will need to perform manual
registration.
a Press Menu, 4, 7, 1.
b Press Mono Start or Colour Start to
start printing the colour registration
chart.
c When the machine has finished printing
the registration sheet,
press 2 (Set Regist.) to correct the
colour manually.
d Starting at 1 (Magenta) on the chart,
check which coloured bar has the most
uniform print density and enter its
number into the machine using the
a and b keys.
Press OK.
Repeat for 2 (Cyan), 3 (Yellow), 4, 5, 6
to 9.
e Press Stop/Exit.
Frequency (Colour Correction) C
You can set how often the colour correction
(Colour Calibration and Auto Registration)
occurs. The default setting is Normal. The
colour correction process consumes some
amount of the toner.
a Press Menu, 4, 9.
b Press a or b to choose Normal, Low or
Off.
Press OK.
c Press Stop/Exit.