Brother MFC-9325CW - Wireless One-Push Configuration

238
Wireless one-push configuration E
If your wireless access point supports either Wi-Fi Protected Setup (PBC
1
) or AOSS™, you can
configure the machine easily without a computer. By pushing a button on the wireless LAN router
/ access point and using the menu on the machine, you can set up the wireless network and
security settings. See the User’s Guide for your wireless LAN router / access point for instructions
on how to access one-push mode.
1
Push Button Configuration
Note
Routers or access points that support Wi-Fi Protected Setup or AOSS™ have the symbols
shown below.