Troubleshooting and routine maintenance
195
C
j Reinstall the original packing material
into the machine.
k Close the top cover.
l Put the waste toner box and one drum
unit and toner cartridges assembly in
the Styrofoam piece.
m Using two people, place the machine
into the plastic bag.
n Put the machine and the Styrofoam
pieces into the carton. Match the front
side of the machine to the “FRONT”
mark on the Styrofoam pieces. Put the
Styrofoam pieces for the drum unit and
toner cartridge assemblies on the top of
the machine.
o Put the power cord, and the three
remaining drum unit and toner cartridge
assemblies into the Styrofoam pieces as
shown in the illustration.
To Next Page
Loading...
