Brother MFC-9460CDN Software User's Guide

Scanning
153
9
d Click Start.
Note
• You cannot adjust the scanning area.
• Duplex scan is available from the ADF only.
Pre-Scanning an image 9
The PreScan button is used to preview and also lets you crop any unwanted areas from the image. When
you are satisfied you are scanning the correct area, click the Start button in the Scanner Setup dialog box to
scan the image.
a Load your document.
b Click PreScan.
The whole image is scanned into your Macintosh and appears in the Scanning Area.
c Drag the mouse pointer over the portion you want to scan.
d Put the document in the ADF again.
Note
If you put the document on the scanner glass in step a, skip this step.
e Adjust the settings for Resolution, Scan Type, Brightness and Contrast in the Scanner Setup dialog
box as needed.
f Click Start.
This time only the chosen area of the document appears in the application window.
g You can refine the image in your editing software.

Brother MFC-9460CDN Specifications

General

Type	all in one
Color	black
Automatic Document Feeder Capacity	35 sheets
Paper Size	plain paper, thin paper, thick paper, thicker paper, recycled paper, bond, label, envelope, thin envelope, thick envelope, glossy paper
Paper Handling	up to 300 sheets
Color Print Speed	25 pages per minute
Mono Print Speed	25 pages per minute
Print Resolution Mono	up to 2400 x 600
Print Resolution Color	up to 2400 x 600
Maximum Number of Pages Per Month	up to 40, 000
Scan Resolution	up to 1200 x 2400
Copier Resolution Mono	up to 2400 x 600
Number Of Cartridges	4
Internal Memory	yes
Memory Card	no
Network	wired
Connectivity	usb 2.0
OS Compatibility	none
Mobile Devices Connection	yes

Weight and Dimensions

Height	19.4 inches
Width	19.8 inches
Net Weight	58.4 pounds