Brother MFC-9460CDN Software User's Guide

ControlCenter2
174
10
File 10
The Scan to File feature lets you scan an image to a folder on your hard disk in any file format. This lets you
easily archive your paper documents. To configure the file type and folder, click the button while holding down
the Ctrl key and choose Software Button.
You can change the File Name. Enter the file name you want to use for the document (up to 100 characters)
in the File Name box. File name will be the file name you registered, current date and sequential number.
Choose the file type for the saved image from the File Type pop-up menu. You can save the file to the default
folder, or choose your preferred folder by clicking the Browse button.
To show where the scanned image is saved when scanning is finished, check Show Folder box. To specify
the destination of the scanned image everytime, check Show Save As Window box.
If you want to scan and then crop a portion of a page after pre-scanning the document, check the Show
Scanner Interface box.
If you want to scan a duplex document, check Duplex (two-sided) Scanning and choose
Long-edge binding or Short-edge binding. (For MFC-9560CDW)
Note
For supported file types, see File types on page 169.

Brother MFC-9460CDN Specifications

General

Type	all in one
Color	black
Automatic Document Feeder Capacity	35 sheets
Paper Size	plain paper, thin paper, thick paper, thicker paper, recycled paper, bond, label, envelope, thin envelope, thick envelope, glossy paper
Paper Handling	up to 300 sheets
Color Print Speed	25 pages per minute
Mono Print Speed	25 pages per minute
Print Resolution Mono	up to 2400 x 600
Print Resolution Color	up to 2400 x 600
Maximum Number of Pages Per Month	up to 40, 000
Scan Resolution	up to 1200 x 2400
Copier Resolution Mono	up to 2400 x 600
Number Of Cartridges	4
Internal Memory	yes
Memory Card	no
Network	wired
Connectivity	usb 2.0
OS Compatibility	none
Mobile Devices Connection	yes

Weight and Dimensions

Height	19.4 inches
Width	19.8 inches
Net Weight	58.4 pounds