Brother MFC-9970CDW - Page 48

Chapter 6
40
Registering the Distinctive Ring
pattern
Very important! 6
After you have set the Distinctive Ring feature
to ON, the receive mode is set to Manual
automatically. Unless you have a TAD or
Voice Mail set up on the Distinctive Ring
number, Manual mode means you must
answer all the calls yourself. You can not
change the receive mode to another mode
while the Distinctive Ring is set to on.
a Press MENU.
b Press a or b to display Fax.
Press Fax.
c Press a or b to display
Miscellaneous.
Press Miscellaneous.
d Press Distinctive.
e Press On.
f Press Stop/Exit. Distinctive Ring is now
set to on.
Turning off Distinctive Ring 6
a Press MENU.
b Press a or b to display Fax.
Press Fax.
c Press a or b to display
Miscellaneous.
Press Miscellaneous.
d Press Distinctive.
e Press Off.
f Press Stop/Exit.
Note
If you turn off Distinctive Ring, the
machine will stay in Manual receive
mode. You will need to set the receive
Mode again. (See Choosing the receive
mode on page 32.)