Brother MFC-9970CDW - Page 95

Routine maintenance
87
A
j Turn the green lock lever (1) clockwise
to the lock position.
k Push the drum unit in until it stops.
l Close the front cover of the machine.
Resetting the belt unit counter A
When you replace a belt unit with a new one,
you will need to reset the belt unit counter by
completing the following steps:
a Press MENU.
b Press a or b to display
Machine Info..
Press Machine Info..
c Press Reset Menu.
d Press Belt Unit.
e The machine will display Reset Belt
Unit?.
f Press Yes, and then press Stop/Exit.
1