86
Network
(Continued)
WPS w/PIN Code — — You can easily configure
your wireless network
settings using WPS with a
PIN code.
WLAN Status Status — You can see the current
wireless network status.
Signal — You can see the current
wireless network signal
strength.
SSID — You can see the current
SSID.
Comm. Mode — You can see the current
Communication Mode.
MAC Address — — You can see your
machine’s MAC address
from the control panel.
WLAN Enable — On
Off*
Lets you use the wireless
network connection.
Network Reset —— —
Level1 Level2 Level3 Options Descriptions
See Network User’s Guide.
The factory settings are shown in Bold with an asterisk.
To Next Page
Loading...
