Brother MFC-J220

Loading documents
21
3
How to load documents 3
Note
To use the scanner glass, the ADF must
be empty. (MFC-J410 and MFC-J415W
only)
a Lift the document cover.
b Using the document guidelines on the
left and top, place the document face
down in the upper left corner of the
scanner glass.
c Close the document cover.
IMPORTANT
If you are scanning a book or thick
document, DO NOT slam the cover down
or press on it.
Scannable area 3
The scannable area depends on the settings
in the application you are using. The figures
below show unscannable areas.
1
The unscannable area is 1 mm when you use the
ADF.
Usage Document
Size
Top (1)
Bottom (2)
Left (3)
Right (4)
Fax A4 3 mm
3 mm
1
Letter 3 mm 4 mm
Legal
(MFC - J410
and
MFC
- J415W
only)
3 mm 4 mm
Copy A4 3 mm 3 mm
Letter 3 mm 3 mm
Scan A4 3 mm 3 mm
Letter 3 mm 3 mm
3
4
1
2