Home > Copy > Copy a Document
Copy a Document
1. Make sure you have loaded the correct size paper in the paper tray.
2. Load your document.
3. Press
[Copy].
The touchscreen displays:
4. Change the copy settings, if needed.
When you load paper other than A4 size plain paper, you must change the [Paper Size] and [Paper
Type] settings by pressing [Options].
Option Description
(No. of
Copies)
Enter the number of copies in one of the following ways:
• Press - or + on the touchscreen.
• Press
to display the keyboard on the touchscreen, and then enter the
number of copies using the touchscreen keyboard. Press OK.
• Enter the number of copies using the dial pad.
(Options) Press [Options] to change the copy settings for the next copy only.
When you have finished changing settings, press OK.
ID
To make an ID card copy with the [2in1 ID Vertical] layout, select the [ID]
checkbox.
Current setting
indications
Press the area indicated on the screen to change copy settings for the next copy only.
• Document Size
• Enlarge/Reduce
• Paper Size
After you have finished selecting new options, you can save them by pressing [Save as Shortcut].
5. Press [Mono Start] or [Colour Start].
147
To Next Page
Loading...
