Brother MFC-J2340DW - Set the Ready Screen

Home > Introduction to Your Machine > Touchscreen LCD Overview > Set the Ready Screen
Set the Ready Screen
You can change the Ready screen to display a specific Home screen or Shortcut screen.
When the machine is idle or you press
, the machine will go back to the screen that you have set.
1. Press [Settings] > [All Settings] > [General Setup] > [Screen Settings] > [Home
Screen].
2. Press a or b to display the screen options, and then select the option you want.
3. Press .
The machine will go to your new Home screen.
Related Information
• Touchscreen LCD Overview
16