Home > Introduction to Your Machine > USB / Ethernet Port Locations on Your Brother Machine
USB / Ethernet Port Locations on Your Brother Machine
The USB and Ethernet ports are located inside the machine.
To install the driver and software necessary to use your machine, go to your model's Downloads page at
support.brother.com.
1. Using both hands, use the finger holds on each side of the machine to lift the scanner cover (1) into the open
position.
2. Locate the correct port (based on the cable you are using) inside the machine as shown.
Carefully guide the cable through the cable channel and out the back of the machine.
3. Gently close the scanner cover using the finger holds on each side.
Related Information
• Introduction to Your Machine
22
To Next Page
Loading...
