Home > Fax > Receive a Fax > Receive Mode Settings > Choose the Correct Receive Mode
Choose the Correct Receive Mode
The factory setting of Receive Mode is “Fax Auto”. Your machine automatically receives any faxes that are sent
to it. There are four Receive Modes of this machine as below.
Operation Display
Factory Setting Ring Delay
Fax Auto
Ring Delay: four times
Fax detection: On
Fax/Tel
Ring Delay: four times
External TAD
Manual
1. Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [Receive Mode].
2. Press a or b to display the [Fax Auto], [Fax/Tel], [External TAD], or [Manual] option, and then
press the option you want.
3. Press .
Related Information
• Receive Mode Settings
Related Topics:
• Connect an External TAD
• Telephone and Fax Problems
• Remote Retrieval Commands
181
To Next Page
Loading...
