Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Send Tone Signals
Send Tone Signals
If you have a Pulse dialling service, but must send Tone signals (for example, for telephone banking), follow
these steps. If you have a Touch Tone service, you will not need this feature to send tone signals.
1. Press
[Fax].
If [Fax Preview] is set to [On], press [Fax] > [Sending Faxes].
2. Press [Hook].
3. Press # using the dial pad. Any digits dialled after this will send tone signals.
When you are finished with the call, the machine will return to the Pulse dialling service.
Related Information
• Voice Operations
207
To Next Page
Loading...
