Enter the WPA key, and then press [OK].
• For more information about how to enter text, see Related Information.
• Your Brother machine supports the use of the first WEP key only.
9. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the LCD displays [Connected].
You have completed the wireless network setup. To install the drivers and software necessary to use your
machine, go to your model's Downloads page at
support.brother.com.
Related Information
• Use the Wireless Network
Related Topics:
• If You Are Having Difficulty with Your Machine's Network
• Enter Text on Your Brother Machine
272
To Next Page
Loading...
