Home > Network > Network Features > Fax Using the Internet (I-Fax) > Configure Your Brother Machine for
Email or I-Fax
Configure Your Brother Machine for Email or I-Fax
Before using I-Fax, configure your Brother machine to communicate with your network and mail server. You
can configure these items using the machine's control panel or Web Based Management. We recommend
using Web Based Management to configure the optional items.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If required, type the password in the Login field, and then click Login.
The default password to manage this machine’s settings is located on the back of the machine and marked
"Pwd".
4. Go to the navigation menu, and then click Network > Network > Protocol.
Start from , if the navigation menu is not shown on the left side of the screen.
5. In the POP3/IMAP4/SMTP Client field, click Advanced Settings and configure the settings as needed.
If you are unsure of any of these items, contact your system administrator.
6. When finished, click Submit.
The Test Send/Receive E-mail Configuration dialog box appears.
7. Follow the instructions in the dialog box to test the current settings.
Related Information
• Fax Using the Internet (I-Fax)
• Initial Setup for Email or I-Fax
• Receive an I-Fax Automatically
• How Received I-Faxes Appear on a Computer
Related Topics:
• Access Web Based Management
• I-Fax Options
288
To Next Page
Loading...
