Home > Network > Network Features > Fax Using the Internet (I-Fax) > Send an I-Fax
Send an I-Fax
Sending an I-Fax is like sending a normal fax. Make sure that your recipient's information is saved in your email
address book, and load the document you want to I-Fax into your Brother machine.
If the computer to which you want to send a document is not running Windows, ask the computer's owner to
install software that can view TIFF files.
1. Load your document.
2. Do one of the following:
• If [Fax Preview] is set to [Off], press [Fax].
• If [Fax Preview] is set to [On], press [Fax], and then press [Sending Faxes].
3. To change the fax-sending settings, press [Options].
4. Press a or b to scroll through the fax settings. When the setting you want is displayed, press it and choose
your preference. When you have finished changing settings, press [OK].
5. Do one of the following:
• Press , and then enter the email address.
• Press [Address Book], choose the email address of your recipient, and then press [Apply].
6. Press [Fax Start].
The machine starts scanning. After the document is scanned, it is transmitted to the recipient via your SMTP
server. You can cancel the send operation by pressing during scanning. When the transmission is
finished, the machine will enter standby mode.
Related Information
• Fax Using the Internet (I-Fax)
293
To Next Page
Loading...
