Home > Administrator > Security Features > Network Security > Disable Unnecessary Protocols
Disable Unnecessary Protocols
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If required, type the password in the Login field, and then click Login.
The default password to manage this machine’s settings is located on the back of the machine and marked
"Pwd".
4. Go to the navigation menu, and then click Network > Network > Protocol.
Start from , if the navigation menu is not shown on the left side of the screen.
5. Clear any unnecessary protocol check boxes to disable them.
6. Click Submit.
7. Restart your Brother machine to activate the configuration.
Related Information
• Network Security
Related Topics:
• Access Web Based Management
375
To Next Page
Loading...
