10
9
Choose a Receive Mode
By factory default, the factory setting of Receive Mode is “Fax”. your machine will automatically receive any faxes
that are sent to it. There are four receive modes of this machine as below.
1
If the caller wants to send a fax during a call or the caller sends you a fax call, please press Fax Start button (under easy mode) on the
control panel of the machine or press l 5 1 keys on the external answering phone device (you have to turn on the remote codes first). uu
Basic User's Guide: Using remote codes.
To set a receive mode follow the instructions below:
a Press (Settings).
b Press All Settings.
c Press Fax.
d Press Setup Receive.
e Press Receive Mode.
f Press your preferred receive mode
g Press .
The Touchscreen will display the current receive mode.
Touchscreen Display
Factory Default Ring Delay
Fax Auto
Ring Delay: 2 times
Fax detection: on
Fax/Tel
Ring Delay: 2 times
Time: 30 seconds
Manual
External TAD
Mode Function Description
Fax Auto
Each call recognized
as fax and send fax
signal. However, you
can answer the call
within the number of
rings.
Factory setting of Ring Delay is 2 (0-10 times available. uu Basic User's
Guide:
Ring Delay)
. After ringing 2 times,the fax machine send fax-receiv-
ing signals automatically;
Tip: If your machine is connecting an external answering phone device, and
often use it to answer incoming calls, you could set the ring time through 4
to 6 times.
Within the recommended ringing times, you can use the external answering
phone device to answer and talk.
1
Fax/Tel
Automatically deter-
mine whether the in-
coming call is
telephone or fax calls.
Non-Fax call will
make a fast double-
ring to inform you an-
swer the phone.
Factory setting of Ring Delay is 2
(0-10 times available. uu Basic User's
Guide:
Ring Delay). Factory setting of F/T ring time (a fast double-ring) is 30
seconds (20, 30, 40, 70 seconds available.
uu Basic User's Guide:
F/T Ring
Time (Fax/Tel mode only)
).
According to incoming call after the fax machine rings 2 times:
1) For the fax call, send fax received signal;
2)
For the telephone call, make a fast double-ring,waiting for you answer the phone.
Tip: If your machine is connecting an external answering phone device,
you could set the ringing time through 4 to 6 times to answer the call.
1
Manual
Machine doesn't recog-
nize each call, only as
a common phone call
that you need to deter-
mine after answering
the phone
.
Answering the call, or if the caller wants to send you a fax, press Fax
Start button (under easy mode) to receive faxes.
Tip: If your machine is connecting an external answering phone device, you can
use the external answering phone device to answer and talk.
1
External TAD
The external answering
machine (TAD)
automactically answers
every call. Voice mes-
sages are stored on the
external TAD. Fax mes-
sages are printed.
Use this mode if you have connected an external answering machine to
your machine. The TAD setting works only with an external answering
machine.
Note: Ring Delay and F/T Ring Time do not work in this setting.
To Next Page
Loading...
Need help?
General
